Heat shrink end cap

Heat shrink end cap

Recommended for cable terminals with PVC and XLPE isolation for protection against water and mechanical contamination. Spirally applied layer of adhesive will ensure a sufficient amount of material on the surface, which ensures a perfect termination after shrinkage It provides protection against oxidation and ozone. It can be used for telecommunication network and electrical networks up to 1 kV.

  • Shrink ratio: 3:1
  • UV resistant
  • Flame resistant
  • Water resistant
  • -55°C – +110°C
  • Flexible
  • Halogen free
  • Ecological raw material produced under the EU RoHS directive.
  • Material: modified polyolefin, internal adhesive
  • Packaging: per unit
Article No. Internal diameter (mm) Wall thickness fully recovered (mm) Lenght (m) Cable diameter (mm)
Min.as supplied Max. fully recovered
STECL-012 12 4,0 2,0 40 4-10
STECL-014 14 4,5 2,0 45 5-12
STECL-020 20 6,0 2,3 55 6-16
STECL-025 25 8,0 2,3 83 10-20
STECL-035 35 16,0 3,0 83 17-30
STECL-040 40 16,0 3,0 83 18-32
STECL-055 55 26,0 3,3 103 28-48
STECL-075 75 36,0 3,5 120 45-65
STECL-100 100 50,0 4,0 140 55-90
STECL-120 120 60,0 4,0 150 65-110
STECL-145 145 60,0 4,0 150 70-130
STECL-160 160 82,0 4,0 150 90-150
STECL-200 200 90,0 4,2 160 100-180
Check out Our free catalogue!

Please fill out the form: