Heat shrink end cap

Heat shrink end cap

Recommended for cable terminals with PVC and XLPE isolation for protection against water and mechanical contamination. Spirally applied layer of adhesive will ensure a sufficient amount of material on the surface, which ensures a perfect termination after shrinkage It provides protection against oxidation and ozone. It can be used for telecommunication network and electrical networks up to 1 kV.

  • Shrink ratio: 3:1
  • UV resistant
  • Flame resistant
  • Water resistant
  • -55°C – +110°C
  • Flexible
  • Halogen free
  • Ecological raw material produced under the EU RoHS directive.
  • Material: modified polyolefin, internal adhesive
  • Packaging: per unit
Article No.Internal diameter (mm)Wall thickness fully recovered (mm)Lenght (m)Cable diameter (mm)
Min.as suppliedMax. fully recovered
STECL-012124,02,0404-10
STECL-014144,52,0455-12
STECL-020206,02,3556-16
STECL-025258,02,38310-20
STECL-0353516,03,08317-30
STECL-0404016,03,08318-32
STECL-0555526,03,310328-48
STECL-0757536,03,512045-65
STECL-10010050,04,014055-90
STECL-12012060,04,015065-110
STECL-14514560,04,015070-130
STECL-16016082,04,015090-150
STECL-20020090,04,2160100-180
Check out Our free catalogue!