Low voltage heat shrink table joints

Low voltage heat shrink table joints

Shrink technologies using heat are the one of the simplest and cheapest connection systems in the world. In connection of connecting 1 kV cables, the thermal shrink tubes Shrinktech may isolate various cables, such as XLPE, PVC and MI/MIND with paper isolation.

  • Shrink ratio: 3:1
  • UV resistant
  • Flame resistant
  • Water resistant
  • -45°C – +110°C
  • Halogen free
  • Ecological raw material produced under the EU RoHS directive.
  • Material: modified polyolefin
  • Packaging: set
Article No.Cable diameter (mm)Outside heat shrink tubeInside heat shrink tube
Lenght (mm)Internal diameter (mm)PieceLenght (mm)Internal diameter (mm)Piece
STLV1 2,5-104X2,5 – 4X1030034/818012/34
STLV2 6-254×6 – 4X2540056/16112519/64
STLV3 6-25/55X6 – 5X2540056/16112519/65
STLV4 16-504X16 – 4X5060073/22116030/84
STLV5 25-704X25 – 4X7070073/22120030/84
STLV6 35-1854X35 – 4X18575090/25125030/84
STLV7 120-2404X120 – 4X240900130/40130041/124
STLV8 240/1-1203X240 – 1X12088090/25130041/123
     20030/81
Check out Our free catalogue!