Heat shrink end cap

STECL

Recommended for cable terminals with PVC and XLPE isolation for protection against water and mechanical contamination. Spirally applied layer of adhesive will ensure a sufficient amount of material on the surface, which ensures a perfect termination after shrinkage It provides protection against oxidation and ozone. It can be used for telecommunication network and electrical networks up to 1 kV.

  • Shrink ratio: 3:1
  • UV resistant
  • Flame resistant
  • Water resistant
  • -55°C – +110°C
  • Flexible
  • Halogen free
  • Ecological raw material produced under the EU RoHS directive.
  • Material: modified polyolefin, internal adhesive
  • Packaging: per unit
Compare
Category:
Article No. Internal diameter (mm) Wall thickness fully recovered (mm) Lenght (m) Cable diameter (mm)
Min.as supplied Max. fully recovered
STECL-012 12 4,0 2,0 40 4-10
STECL-014 14 4,5 2,0 45 5-12
STECL-020 20 6,0 2,3 55 6-16
STECL-025 25 8,0 2,3 83 10-20
STECL-035 35 16,0 3,0 83 17-30
STECL-040 40 16,0 3,0 83 18-32
STECL-055 55 26,0 3,3 103 28-48
STECL-075 75 36,0 3,5 120 45-65
STECL-100 100 50,0 4,0 140 55-90
STECL-120 120 60,0 4,0 150 65-110
STECL-145 145 60,0 4,0 150 70-130
STECL-160 160 82,0 4,0 150 90-150
STECL-200 200 90,0 4,2 160 100-180

Description

Article No. Internal diameter (mm) Wall thickness fully recovered (mm) Lenght (m) Cable diameter (mm)
Min.as supplied Max. fully recovered
STECL-012 12 4,0 2,0 40 4-10
STECL-014 14 4,5 2,0 45 5-12
STECL-020 20 6,0 2,3 55 6-16
STECL-025 25 8,0 2,3 83 10-20
STECL-035 35 16,0 3,0 83 17-30
STECL-040 40 16,0 3,0 83 18-32
STECL-055 55 26,0 3,3 103 28-48
STECL-075 75 36,0 3,5 120 45-65
STECL-100 100 50,0 4,0 140 55-90
STECL-120 120 60,0 4,0 150 65-110
STECL-145 145 60,0 4,0 150 70-130
STECL-160 160 82,0 4,0 150 90-150
STECL-200 200 90,0 4,2 160 100-180

Reviews

There are no reviews yet.

Be the first to review “Heat shrink end cap”

Your email address will not be published. Required fields are marked *

You may also like…

Check out Our free catalogue!